Specifications:

Frequency Response: 100-10,000 Hz

Power Handling Capacity: 30 watts continuous pink noise

Impedance: 8 ohms

Dispersion: Omnidirectional underwater

Operating Depth: Up to 3.0m(10.0ft) below surface of water

Recommended Installation Depth: 1.2 m (4.0 ft)

Finish: Pool blue

Dimensions:

Over-AII Diameter: 18.26 cm (7.19 in.)
Depth: 6.63 cm (2.61 in.)

Shipping Weight: 1.8 kg (4.0 Ib)

Installation:

For new pool construction and modification of older pools, installing the UW-30 flush with the sides of the pool makes a very neat and unobtrusive installation. The speaker is mounted in a wet-niche in the same manner as an underwater light. The speaker is mounted up to 1.2 m (4 A) below the surface of the water and flush with the side of the pool. (For installation in water depths lower than recommended please contact factory.) A marine plywood or stainless steel mounting ring is recommended, The wet-niche itself may be square or cylindrical in shape as desired. Several pool equipment manufacturers have wet-niches available into which the UW-30 may be installed.

Layout

When underwater speakers are installed, particularly in smaller pools where only one or two speakers are needed, they should be located in the deep end of the pool. The above recommendation will effectively equalize the intensity of sound throughout the pool. For installations in large pools, such as at country clubs, municipal facilities, etc., the speakers should be located around the periphery of the pool. A good rule to follow for large pools is one speaker for every 900 square feet of pool surface at the deep end and one speaker for every 1200 square feet of pool surface for the shallow end. Of course, for high noise conditions in the pool, the number of speakers should be doubled for best results.

WARRANTY (Limited)

University Sound Speakers and Speaker Systems (excluding active electronics) are guaranteed for five years from date of original purchase against malfunction due to defects in workmanship and materials. If such malfunction occurs, unit will be repaired or replaced (at our option) without charge for materials or labor if delivered prepaid to University Sound. Unit will be returned prepaid. Warranty does not extend to finish, appearance items, burned coils, or malfunction due to abuse or operation under other than specified conditions, including cone and/or coil damage resulting from improperly designed enclosures, nor does it extend to incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above sxclusion may not apply to you. Repair by other than University Sound will void this guarantee. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.