ateromponents &uildingupply, Inc.

Epoxy Paste Adhesive

Uses:

Set anchor bolts, bond precast units; bond metal to metal, rubber to concrete, fill with one part by weight sand for overhead and vertical gap filling. Spall repair on piers, and protective coating on masonry in sewage treatment plants. Crack sealer for epoxy injection work.

Technical Data:

Mixing ratio 1:1 mix for a minimum of three minutes or until uniform color is obtained. Mixing can be facilitated by using a Jiffy mixer and a 600 rpm drill. Part "A" is white, part "B" is black uniform color grey. Working pot life is 55 minutes at 77° F. Cure time 24 hours at 77° F. Thin films wilt take longer to cure. Bonds to dry or damp surfaces. Do not apply to surfaces under 40° F. Bring Epoxy Paste Adhesive to 75° F to facilitate mixing and prevent shock on cold surfaces. Do not thin Epoxy Paste Adhesive as solvents will prevent proper cure. Coverage as required by job conditions.

Shelf Life:

1 year in unopened containers.

Physical Properties:

Compressive strength 11685 PSI. Tensile strength 5961 PSI.

 
Bolt Pullout Bolt Dia. Hole Dia. Depth Load  Failure
 
              3/8"        5/8"     3"  7250  Concrete
              3/4"          1"     5"  7840  Concrete
 

Handling:

Use barrier creams and disposable rubber gloves. Wash with soap and water. Do not wash hands with solvents. Epoxies contain chemical compounds that may cause allergic skin and respiratory reaction. Harmful if swallowed. Do not get in eyes or on skin. Use only with adequate ventilation. Wash thoroughly after handling.

Tool Cleanup:

Wash before epoxy has set with acetone, MEK, Xylene, or toluene, these are all flammable materials. After scraping off excess material, use rags and solvent to finish cleanup. See above handling precautions.

Packaging: