Water Components & Building Supply, Inc.

Sure-Anchor Epoxies


These are 100% solids high modulus, two component, structural epoxy gel adhesives that meet ASTM C-881. They are available in cartridges for easy dispensing, as well as larger, gallon units.

Ideal for anchoring dowels, bolts and reinforcing steel into concrete. They are also well-suited for vertical and horizontal structural bonding and patching. To prepare a mortar for patching, just mix one part clean sand to one part by volume mixed Sure-Anchor Epoxy. They may also be used to seal cracks and set injection ports prior to injection grouting.

ADVANTAGES:


 

Product Specifications
 Sure Anchor Epoxy (J-50)  Sure-Anchor I™ (J-51)
  Specification Met  ASTM C-881, Type 1 and 2, Grade 3, Classes B & C ASTM C-881-90, Type 1 and 4, Grade 3, Classes B. C & D
 Mix Ratio  1 Part A to 1 Part B by volume  1 Part A to 1 Part B by volume
 Color  Gray Dark Gray
Consistency  Non-sag gel  Non-sag gel
Gel Time  8-10 minutes at 72° F  10 minutes at 75°F
Cure  7 days 24 hours
Shelf Life  1 year in unopened containers  1 year in unopened containers
Compressive Strength  ASTM D-695: 12,000 psi at 7 days  ASTM D-695: 10,200 psi at 7 days
Concrete Bond Strength  ASTM C-882: 2,200 psi at 14 days  ASTM C-882: 4,300 psi at 14 days
Modulus of Elasticity  500,000 psi  300,000 psi
Water Absorption  ASTM D-570 - .26%  ASTM D-570 - .2%

WARNING:

Component A - Prolonged or repeated exposure may cause eye or skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses and wear protective rubber gloves. In case of ingestion, call a physician.

Component B - Contact with skin may cause severe burns. Wash immediately with soap and water. Avoid eye contact. If eye contact occurs, flush immediately with water. Product is a strong sensitizer. Avoid breathing vapors. Use safety glasses and wear protective rubber gloves. In case of ingestion, call a physician.
 

Home Back to Main Index Write to Water Components Write to the Webmaster