ateromponents &uildingupply, Inc.

PG-2089 is a 100% solids, two component, equal volume epoxy system in combination with thoroughly dispersed fillers and a compatible curing agent. It is epoxy mortar with the consistency of peanut butter, used as an adhesive to join concrete to concrete, masonry or dissimilar materials. It is used to provide a cove and seal around the periphery of below grade areas at the juncture of walls and floors. As a filler, it is ideal for effective treatment of cracks, voids and other defects in concrete, brick or block structures. Excellent adhesion and non-shrinking properties assure permanent repairs. Surfacing applications include where small holes, depressions, and spalled areas exist. PG-2089 is excellent as an adhesive to attach tiles, mosaics, glass or other objects to wall or floor surfaces.

INSTALLATION:

Surfaces should be clean, free of all paints and sealants, sound and relatively dry.

Cleaning:

Conventional methods normally used. (Acid etching or mechanical scarification)

Product Mixing:

1. Blend equal volumes of base and reactor.
2. Mix until uniform streak-free color is in evidence.

Application:

Can be applied with trowel, putty knife or screed bar. When two pieces of concrete are to be joined, both surfaces should be covered with PG-2089. Clamping is unnecessary. When used as a filler, mortar or surfacing, fill entire void. The mortar should be pressed firmly to avoid bridging. On deep voids or crevices PG-2089 can be injected with conventional caulking gun equipment. Mortars are easily smoothed by keeping application tools clean and lightly wetted with mineral spirits.

PROPERTIES:

ADVANTAGES:

• Easy to mix
• Easy application
• Aggregate pre-blended in base and reactor
• No shrinkage
• USDA Approved
• Compliance with OSHA requirements and standards
• Waterproof
• Long pot life
• Non-sagging, can be used on vertical and overhead surfaces