ateromponents &uildingupply, Inc.

Clear Acryl Seal Emulsion Base

Uses:

Clear Acryl Seal E.B. may be used to seal any type of porous concrete or masonry surfaces such as new or old concrete, exposed aggregate, or block masonry units.

Technical data:

A light, very sprayable consistency. Do not apply to surfaces below 40° F. Meets all air pollution requirements. For best results mechanically scrub concrete floors before sealing. Clear Acryl Seal E.B. is an emulsion and needs a clean surface to adhere properly. It is much safer to use on interior surfaces because it is an emulsion. Less solvent odors are produced. Clear Acryl Seal can be used on exterior surfaces as it stubbornly resists yellowing.

Application:

By hand or power sprayer.

Coverage:

300 square feet per gallon as a curing compound. 300 square feet per gallon as a sealer on new concrete. 300 square feet per gallon on old concrete; old concrete may require a second coat at 400 square feet per gallon. 300 square feet per gallon on exposed aggregate, two coats are required. 350 square feet per gallon on concrete block, two coats are required.

Packaging:

Shelf life:

1 year minimum in unopened containers

Warnings:

Do not apply on surfaces that are under 40° F. Provide adequate ventilation and do not use near an open flame. For interior use turn off all pilot lights, motors , or anything that may cause sparks. Flashpoint in excess of 200° F.