|
|
Chemtrol
These are for controlling sanitizers manufactured by Santa Barbara Control
Systems.
CAUTION: NEVER USE an ORP-only controller with an acidic or basic sanitizer.
With neutral sanitizer, test pH regularly and maintain within 7.4 - 7.6.
|
| CHEMTROL 205 ORP CONTROLLER
- Small pools and spas using a pH-neutral sanitizer. Compatible with
ozone. |
|
| CHEMTROL 210 ORP/pH
CONTROLLER - Small pools and spas using chlorine or bromine sanitizers.
Compatible with ozone. |
|
| CHEMTROLPC2000 -
Programmable Controller |
|
| CHEMTROLPC3000 -
Programmable Controller |
|
| CHEMTROL PC6000 -
INTEGRATED CONTROLLER |
|
CHEMTROL 205 ORP CONTROLLER
Features
- ANALOG ORP READOUT METER
- DIRECT DIAL ORP CONTROL SETPOINT
- NO CALIBRATION REQUIRED
- 5 A OUTPUT FOR PUMP OR SOLENOID VALVE
- FEED AND OUT-OF-RANGE INDICATING LIGHTS
- NON-CORRODING POLYSTYRENE CABINET
SPECIFICATIONS
- CHEMTROL 205 ORP CONTROLLER for control of neutral sanitizer.
- Single anticorrosion-coated electronic module.
- ORP control range from 400 to 900 mV +I- 5 mV with direct dial setpoint and
out-of-range safety lockout.
- LED indicating lights for feed and high/low ORP.
- Sealed ORP combination electrode with 0.5 cm² high-purity platinum
ring. Standard 10 ft (3 m) shielded cable and BNC connector. Extension cable
with BNC connectors available up to 100 ft.
MECHANICAL: 9x7x4 in (22x18x10 cm) cabinet.
ELECTRICAL: Choice of 110V or 230V input/output or 24VAC input/output with
UL-listed 24VAC transformer.
PLUMBING: Patented saddle clamp fitting for easy inline sensor assembly.
Optional 1-1/2 or 2-inch plumbing kit
Back to Top
|
CHEMTROL 210 ORP/pH
CONTROLLER
Features
- ANALOG READOUT METER FOR ORP AND pH
- DIRECT DIAL CONTROL SETPOINTS
- ACID/BASE FEED SELECTOR SWITCH
- 5 A OUTPUTS FOR PUMPS OR SOLENOID VALVE
- FEED AND OUT-OF-RANGE INDICATING LIGHTS
- NON-CORRODING POLYSTYRENE CABINET
- PATENTED SADDLE CLAMPS FITTINGS for easy installation of sensors.
SPECIFICATIONS
- CHEMTROL 210 ORP/pH CONTROLLER for control of chlorine or
bromine-based sanitizers.
- Single anticorrosion-coated electronic module.
- ORP control range from 400 to 900 mV +/- 5 mV with direct dial setpoint and
out-of-range safety feed lockout.
- PH control range from 7.0 to 8.0 +/- 0.05 with direct dial setpoint and
out-of-range safety feed lockout.
- LED indicating lights for feed and high/low ORP.
- Sealed pH glass electrode. Sealed ORP electrode with 0.5 cm²
high-purity platinum ring. Standard 10 ft (3 m) shielded cable and BNC
connector. Extension cables with BNC connectors available up to 100 ft.
MECHANICAL 9x7x4 in (22x18x10 cm) cabinet.
ELECTRICAL: Choice of 110V or 230V inpuVoutpub or 24VAC with 24VAC UL-listed
transformer.
PLUMBING: Patented saddle clamp fittings for easy in-line sensor assembly.
Optional 1 1/2 or 2-inch plumbing kits with two (2) PVC reducing tees and two
(2) 1/2-in compression fittings.
Back to Top
|
CHEMTROL PC2000
PROGRAMMABLE CONTROLLER
Provides automatic maintenance of water chemistry and water balance.
Includes programmable superchlorination and chemicals savings cycles and
display of the Langelier Saturation Index.
Multi-line menu screen displays provide direct access to all operating
functions via keypad, including sensor calibration, control setpoints, alarm
levels and the programs for superchlorination and chemical savings.
- Feed Control - Manual, ON/OFF, Proportional Feed, Timer
- Calibration - 1, 2 or 3 points
- Langelier Index - Scaling and corrosion alert
- Shock Program - Superchlorination
- Savings - Chemical saver programs
- Failure Analysis - Dynamic Probe Testing with sensor failure warning for
ORP and pH
- Data Logging - On-board memory for 1,000 tests
- Data Printing - Real-time with data logging or downloading from storage
memory
- Languages - English, French and Spanish menus
- Units - US and metric systems
- Passwords - Security protection with ten 5-digit codes with 3 different
access levels
- Clock - 24-hour universal clock/calendar
- Battery - Maintains all settings in case of power shutdown
- Warranty - Five (5) years warranty on PC boards
Back to Top
|
|
CHEMTROL PC3000 PROGRAMMABLE CONTROLLER
a
programmable control system that offers control of water chemistry, water
balance, heating and recirculation. with ORP,PPM, pH and Temperature control,
bypass line assembly, probe rinse, remote alarm and RS-232 communication port.
- OPTION REM: Full duplex remote computer operation with communication modem.
-
- OPTION TEL: Telephone voice communications with status reports, alarm
callouts and remote operation control.
-
- OPTION TDS: TDS and Conductivity control with dump valve and three (3)
chemical addition programs.
-
- OPTION LEV: Water level control with electronic sensor and fill valve
control.
-
- OPTION FLOW: Flow monitoring with electronic sensor and adjustable alarms.
-
- OPTION PRESS: Influent and effluent pressure sensors and adjustable alarms.
Back to Top
|
CHEMTROL PC6000
PROGRAMMABLE CONTROLLER
an automated control system that offers fully integrated control of all the
chemical and physical processes required for water treatment with ORP, PPM, pH
and temperature control, water balance, flow control, influent and effluent
pressure control,filter control with programmable backwash cycles, remote
computer operation and voice telephone communications.
Back to Top
|